FireNEX™-uLINK-10G

USB-C Multi-function Active Repeater Cable

One Cable for USB 3.2 10Gbps, DisplayPort™ 1.4, and 30W PD


Since its introduction, the USB-C interface comes with amazing features such as SuperSpeed 10Gbps data rate, Display Alt Mode, and USB PD over the bus. Typically, the maximum length of a full feature USB-C cable is only 1 meter (3.3 ft.).

To outbreak this length barrier, Newnex has developed the FireNEX™-uLINK-10G, USB C to C Multi-function Active Repeater Cable which enables user to transmit USB 3.2 10Gbps, DisplayPort™ 1.4, and Bus Powered 30W PD simultaneously in one single connection for up to 8m (26.2 ft.).

Features

  • Support USB 3.2 Gen2 data rate up to 10Gbps
  • Backward compatible to lower generation USB 3.2 Gen 1, and USB 2.0/1.1
  • Support DisplayPort™ 1.4a data rate up to 8.1Gbps, up to one display 4K@60Hz, or two 4K@30Hz
  • USB PD 3.0 support up to 20V/1.5A from either host to device or device to host
  • No driver needed for Windows, MAC, and Linux OS
  • Compact and ruggedized metal enclosure for repeater unit, ideal for conduit installation

Specifications


USB
USB 3.2
Support USB 3.2 Gen2x1 up to 10Gbps
USB 3.0
Support USB 3.2 Gen1x1 up to 5Gbps
(Aka USB 3.1 Gen 1, USB 3.0)
USB 2.0/1.1
Backward compatible

DISPLAY
DP v1.4
(HBR3 Source & devices)
Up to one 4K@60Hz, or two 4K@30Hz, or three 1080@60Hz
DP v1.2
(HBR2 Source & devices)
Up to one 4K@30Hz, or two 1080@60Hz, or three 1024@60Hz

POWER DELIVERY
USB Power Delivery
USB PD 3.0 from both host to device and device to host
(Via bus without additional power input)
Voltage Profile
20V, 15V, 12V, 9V, 5V
Current Profile
Up to 1.5A

MECHANICAL
Repeater Unit Dimension
16 x 18 x 46 mm (0.63 x 0.71 x 1.81 in.)
Cable Diameter
6.4 +/- 0.1 mm (0.27 in.)
Jacket Material
TPE, Black
USB Connector on Host Side
USB-C, Male, Aqua
USB Connector on Device Side
USB-C, Male, Black

ENVIRONMENTAL
Operating Temperature:
0 ℃ to 40 ℃ (32 ℉ to 104 ℉)
Operating Humidity
20% to 80% relative humidity, non-condensing

SUPPORT
Warranty
1-year Manufacture Warranty

In The Box

  • 1x FireNEX™-uLINK-10G Cable
  • 1x Quick Start Manual Card

Application

USB 3.2 installation

FAQ

Q: Can FireNEX™-uLINK-10G support DisplayPort Alt Mode (DP Alt Mode)?
A: Yes, FireNEX™-uLINK-10G support DisplayPort over USB-C. It allow you connect video source and display device to each other via their USB-C port while transfer USB 3.2 10Gbps data at the same time. Please make sure USB-C port on your host and device support DisplayPort over USB-C.

Q: Is FireNEX™-uLINK-10G backward compatible with USB 2.0/1.1?
A: Yes, FireNEX™-uLINK-10G is fully compatible with USB 2.0/1.1 peripherals such as keyboard, and mouse.

Q: Does FireNEX™-uLINK-10G support Power Delivery (USB PD) from host to device or device to host?
A: FireNEX™-uLINK-10G support USB PD for higher voltage charging (20V, 15V, 12V, 9V, 5V) either from host to device or from device to the host. It will automatically pick up the charging direction to suit your need.

2021 © Newnex Technology Corp. All Rights Reserved. Privacy Policy